Skip to main content

CLEANFLOW casting system

SKU: 900090.1KIT Category:

CLEANFLOW is a kit created to support the preparation process of casting cylinders. It’s been developed to improve the flow and the burning phase of the tree material during the burnout cycle.
The principle on which it is based reduces considerably the problems due to slags inside the cylinder and combustion gas bubbles that struggle to exit with the traditional system.
The quality of traditional casting and proto-casting is one of the most common topics in the jewelry sector.
In lost wax casting it’s hard to maintain a constant quality of the product.
In casting with systems printed with 3D technology resin, on the other hand, a discrepancy can be noticed among the types of resins with different melting points and different geometries.
CLEANFLOW goal is to stabilize and significantly improve these and other aspects.

The kit contains all the necessary elements for preparation of 20 cylinders of ø 100 mm

8 in stock

360,00 IVA esclusa

8 in stock

ADVANTAGES

  • Increased casting quality

    Efficient resin combustion resulting in increase of casting qualities thanks to major reduction of waste residue

  • Additional savings

    Possible reduction of diameter and capacity of the central sprue that is part of the tree

    • Saving of metal quantity necessary for casting
    • Additional saving during refining of waste
  • Easy flow

    Easy flow of the combustion gas for improvement of casting quality

  • Typical workflow maintained

    Use of CLEANFLOW doesn’t require any substantial change from traditional casting techniques.

  • Reduction of burnout cycle

    The burnout cycle is reduced due to heat flowing through the vacuum created by the cylinder – which has holes at both top and bottom. This chimney-effect creates a much faster, more efficient burnout. 

    • 25% to 50% reduction of cylinder burn-out time
    • Substantial energy saving, proportioned to the reduction of burn-out time
    • Reduction of investment volume

Kit contents

  • Perforated lid for the centering of the sprue and creation of a second hole in the investment cover

  • Heat-resistant conic-shaped cap and C-Clip to seal the second hole at the bottom of the cylinder during metal pouring phase

  • Steel base to support the heat-resistant cone for the correct positioning at the bottom of the cylinders

  • Seal to cover the upper part of the cone for greater resistance

20 lids

2 steel disks

2 graphite caps

2 C-clips fasteners

10 rubber seals

Recyclable packaging

SAVINGS WITH CLEANFLOW

Calculated on a year made of 175 working days

SAVE MORE

ENERGY SAVINGS CAN BE UP TO 50% WHEN USING GOOD QUALITY INVESTMENT CAPABLE OF VERY QUICK BURN OUT CYCLES

From average cost analysis of:

  • non-domestic energy consumption in Europe
  • consumption of annealing furnaces generally used

ADDITIONAL SAVINGS

FROM 5.000 € TO 20.000 €

LESS 5% GOLD TO BE CAST, THANKS TO THE USE OF CLEANSPRUE Ø 10 -8 mm IN PLACE OF STANDARD Ø 11-9 mm SPRUE

8 in stock

360,00 IVA esclusa

8 in stock

Safe payments

Reliable delivery with TNT courier

Assistenza post-vendita garantita

Pagamenti sicuri

FOV è un brand di
LEGOR GROUP S.P.A.

Via del Lavoro, 1
36050 Bressanvido (VI) – Italy